Dont-Install-Routes - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

dont-install-routes

Syntax
Release Information
Description
Mode
542
[ no ] dont-install-routes
Command introduced before JunosE Release 7.1.0.
Prevents OSPF routes that point directly to the OSPF remote neighbor from being installed
in the IP routing table of the VR or VRF in which OSPF is running. The no version restores
the default behavior, which installs the routes in the IP routing table.
Remote Neighbor Configuration
Copyright © 2010, Juniper Networks, Inc.