Isis Metric - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
isis metric
Syntax
Release Information
Description
Options
Mode
1126
isis metric defaultMetric [ level-1 | level-2 ]
no isis metric [ defaultMetric | level-1 | level-2 ]
Command introduced before JunosE Release 7.1.0.
Configures the metric (cost) for the interface to links at the specified level. If no level is
specified, the cost is applied to both level 1 and level 2 links. The no version restores the
default metric value.
defaultMetric—Metric used for the redistributed route; a number in the range 0–63 if
the router is configured with the metric-style narrow command; a number in the range
0–16777215 if the router is configured with the metric-style transition or metric-style
wide command; default value is 10
level-1—Applies metric to level 1 links
level-2—Applies metric to level 2 links
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
