Voice Vlan Enable; Voice Vlan Legacy - H3C S3100 Series Command Manual

<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] voice vlan aging 100

voice vlan enable

Syntax
voice vlan enable
undo voice vlan enable
View
Ethernet port view
Parameters
None
Description
Use the voice vlan enable command to enable the voice VLAN function on the port.
Use the undo voice vlan enable command to disable the voice VLAN function on the port.
By default, the voice VLAN function is disabled on all ports.
To have the voice VLAN function take effect on a port, you must enable it both globally and on the port.
Note that the operations are order independent.
Voice VLAN is not supported on Combo ports. For information about Combo port, refer to Port Basic
Configuration of this manual.
Related commands: display voice vlan error-info, display voice vlan status.
Examples
# Enable the voice VLAN function on Ethernet1/0/2.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/2
[Sysname-Ethernet1/0/2] voice vlan enable

voice vlan legacy

Syntax
voice vlan legacy
undo voice vlan legacy
View
Ethernet port view
1-6