Link Mode Of Interfaces - H3C MSR830-6EI-GL Manual

Item
Reset button
Memory
Flash
Dimensions
(H × W × D)
(excluding
rubber feet
and mounting
brackets)
Rated AC
voltage
Operating
temperature
Relative
humidity

Link mode of interfaces

Table1-3 Interfaces that can operate only as Layer 3 Ethernet interfaces
Device model
MSR830-6EI-GL
MSR830-6HI-GL
MSR830-10HI-GL
MSR830-10EI-GL
Table1-4 Interfaces that support link mode change
Device model
MSR830-6EI-GL
MSR830-6HI-GL
MSR830-10HI-GL
MSR830-10EI-GL
NOTE:
• As from E0821P05, you can change the GE1, GE2, and Combo 3 interfaces on the
MSR830-10HI-GL router as LAN interfaces by using the command line.
• As from R0809P21, you can change the GE2 and GE3 interfaces on the MSR830-10EI-GL router
as LAN interfaces by using the command line.
MSR830-6EI-GL MSR830-10EI-GL
1 1
1GB DDR3 1GB DDR3
256 MB 256 MB
44 × 440 × 225 mm 44 × 440 × 225 mm
(1.73 × 17.32 × 8.86 (1.73 × 17.32 × 8.86
in) in)
100 VAC to 240 100 VAC to 240
VAC @ 50 Hz/60 Hz VAC @ 50 Hz/60 Hz
0°C to 45°C (32°F to 113°F)
5% RH to 95% RH (noncondensing)
MSR830-6HI-GL
1
1GB DDR3
256 MB
44 × 440 × 225 mm
(1.73 × 17.32 × 8.86
in)
100 VAC to 240
VAC @ 50 Hz/60 Hz
Interfaces
GE0, GE1
Combo 0 (GE0, SFP0), GE1
GE0
GE0, GE1
Interfaces
GE2 to GE5
GE2 to GE5
GE1, GE2, Combo 3 (GE3, SFP3), GE4 to GE9
GE2 to GE9
1-6
MSR830-10HI-GL
1
1GB DDR3
256 MB
44 × 440 × 225 mm
(1.73 × 17.32 × 8.86
in)
100 VAC to 240
VAC @ 50 Hz/60 Hz