Snmp-Server Host - Avaya G450 Cli Reference Manual

Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager

snmp-server host

Use the snmp-server host command to identify an SNMP management server, and specify
the kind of messages it receives. Use the no form of the command to remove the specified
server, or to disable a particular set of notification types.
Note:
If you use the no snmp-server host command without a notification type list,
Note:
all notification types are disabled.
Syntax
snmp-server host host_address {traps | informs} {{{v1 | v2c}
community-name} | {v3 level username}} [udp-port port]
[notification-list]
no snmp-server host host_address [{traps|informs}
Parameters
Parameter
host_address
traps
informs
v1
show snmp, snmp trap
Description
The IP address of the SNMP
host
Keyword specifying to send
traps to this host (messages
not requiring
acknowledgement). This is
the default.
Keyword specifying to send
informs to this host
(messages requiring
acknowledgement)
Keyword specifying to use
SNMP v1 functionality with
this host
auth, set snmp trap enable | disable
link-status, snmp-server
Possible Values
SNMP trap configuration
frame-relay,
host, snmp-server informs
notification-list]
Issue 1 January 2008
Default
Value
1093