Testing External Ringing; Testing The Queue Warning Indicator; Testing Integrated Announcement - Avaya G650 Installing

Hide thumbs Also See for G650:

Table of Contents

3. Press Direct Extension Selection (DXS) for the extension that you want to test.

Verify that you hear an audible ringing tone in the ear piece on the attendant console.

4. On the attendant console, press Release.

The audible ringing tone is silenced.

Testing external ringing

Make a test call to the attendant console to verify ringing device sounds when the Night lamp on

console is lighted. If the console does not include a ringing device, connect a spare telephone to

the information outlet that is reserved for ringing device. Then make the test call.

Make a test call to an extension that is associated with a uniform call distribution (UCD) or a

direct department calling (DDC) group. Verify that the queue warning indicator lamp lights up. If

the queue warning indicator was not installed by the customer, connect a spare telephone to the

information outlet that is reserved for queue warning indicator. Then make the test call.

The TN2501AP Announcement circuit packs can store messages. The messages can be

recorded from telephones that are on or off the premises and have flexible message lengths.

The telephone that you select as the test telephone must have a class of service (COS) with

console permission enabled.

Testing external ringing

Issue 2 February 2007

Table of Contents