Queue Warning Indicator; Other Adjunct Installation Information Sources; Call Management System; Intuity Audix Messaging Systems - Avaya CMC1 Installation, Upgrades And Additions

Queue warning indicator

The connections for the queue warning indicator are the same as external ringing. An AC
indicator (light) such as a 21C49 can be used in a Uniform Call Distribution/Direct Departmental
Calling (UCD/DDC) queue. The light is connected to an information outlet. The system side of
the MDF is connected to an analog line circuit pack located in a port carrier.
1. Wire the queue warning indicator to the information outlet.
2. Administer the switch for the new equipment.

Other adjunct installation information sources

This section lists documents you can use for installation of some of the key adjunct systems that
you can connect.

Call Management System

For information on installing Call Management System R3V12, see the following:
Avaya Call Management System (CMS) R12 Software Installation, Maintenance, and
Troubleshooting Guide (585-215-117)
Avaya Call Management System (CMS) Sun Enterprise 3500 Computer Hardware
Installation, Maintenance, and Troubleshooting (585-215-873)
Avaya CMS R12 Sun Blade 100/150 Workstation Hardware Installation, Maintenance, and
Troubleshooting (585-215-783)
Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and
Troubleshooting (585-215-116)

INTUITY AUDIX Messaging Systems

For information on installing INTUITY™ AUDIX
For INTUITY AUDIX Release 5.1 Messaging, see INTUITY Messaging Solutions Release
5 Installation for New Systems on the INTUITY Messaging Solutions Release 5
Documentation CD-ROM, 585-313-803.
For INTUITY AUDIX LX Messaging, see INTUITY AUDIX LX Installation Checklist on the
INTUITY AUDIX LX Release 1 Documentation CD-ROM, 585-313-818.
http://avaya.com/support.
Other adjunct installation information sources
®
Messaging systems, see one of the following:
Issue 10 June 2005 355