Packet Sniffing; Capture Buffer-Mode - Avaya G450 Cli Reference Manual

Example
To display all running protocol details:
G450-001(super)# show ip protocols
To display RIP details:
G450-001(super)# show ip protocols RIP
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 0 seconds
Invalid after 180 seconds, flushed after 300
Redistributing: rip
Default version control: rip version 1
Interface
Routing for Networks:
Routing Information Sources:
Gateway
Related Commands - OSPF
ip ospf authentication,
hello-interval, ip ospf
ospf router-id, router
ospf neighbor
Related Commands - RIP
ip distribution access-list,
default-route-mode,
split-horizon, router rip

Packet sniffing

capture buffer-mode

Use the capture buffer-mode command to specify the type of buffer used by the packet
sniffer.
Syntax
capture buffer-mode {non_cyclic | cyclic}
Version
Last Update
ip ospf authentication-key,
message-digest-key,
ospf, show ip ospf, show ip ospf
ip rip authentication
ip rip poison-reverse,
Key
ip ospf cost, ip ospf
ip ospf network point-to-multipoint,
database,
key, ip rip authentication
ip rip rip-version, ip rip
Packet sniffing
dead-interval, ip ospf
ip ospf priority,
show ip ospf interface,
mode, ip rip
send-receive-mode,
Issue 1 January 2008
ip
show ip
ip rip
635