Chapter 6: Ip Commands; Clear Ip Route - Avaya W310 Command Reference Manual

Chapter 6
IP Commands
This chapter describes the commands that you use to configure IP:
•

clear ip route

• ip icmp redirect
• set ip route
• show interface
• show ip route
clear ip route
User level: privileged, supervisor.
Use the clear ip route command to delete one or all of the dynamic routing entries
from the Routing Table.
Syntax:
The syntax for this command is:
clear ip route <destination gateway> <mask>
Syntax
<destination gateway>
<mask>
Example:
W310-1> clear ip route 192.168.49.1 255.255.255.0
Related Commands:
• Use the
• Use the
Avaya W310 Command Reference Guide
Description
IP address of the IP route
IP address of the gateway associated with the IP route.
command to add a route to the IP routing table.
set ip route
command to display IP routing table entries.
show ip route
61