Chapter 3: Installing The Avaya G250 Media Gateway; Step 1: Mount The G250 Chassis - Avaya G250 Installation And Upgrade Manual

Chapter 3: Installing the Avaya G250 Media Gateway

This chapter describes the physical installation of the G250. Perform the following steps in the
order in which they are listed:

Step 1: Mount the G250 chassis

●
Step 2: Install the media modules
●
Step 3: Attach ground conductors
●
Step 4: Connect power to the G250
●
When you have installed the chassis and media modules, and connected the power, you can
move on to Chapter 4: Connecting
Step 1: Mount the G250 chassis
Mount the G250 in one of the following ways:
In a rack
●
On a wall
●
On a table
●
ELECTROSTATIC ALERT:
When handling any components of an S8300B Media Server or G250 Media Gateway,
ELECTROSTATIC ALERT:
wear an anti-static wrist ground strap. Connect the strap to an approved ground, such as
an unpainted metal surface.
Note:
Avaya has developed special hardware platforms for customers with harsh
Note:
environmental conditions. These platforms have been tested to meet stringent
physical and environmental requirements (i.e., shock, vibration, EMI, etc.)
imposed by the United States Navy for use on their ships. The platforms make
use of specialized racks and reinforcements. If you wish to obtain information
about the design and implementation of such a ruggedized solution, contact the
Avaya Navy Shipboard Services organization.
on page 29
on page 34
on page 38
on page 41
devices, and connect external devices to the G250.
Issue 1.1 June 2005 29