Global Ac Power Distribution Unit J58890Ch - Avaya G650 Installing

2. Connecting small battery holdover leads (J58890CH)
3. Connecting small battery holdover
page 81.
4. Connecting shorting cable to J58890CE
5. Connecting AC power
Table 6: Power requirements
input voltage.

Global AC Power Distribution Unit J58890CH

Note:
An MCC1 with a J58890CH Power Distribution Unit is also referred to as a Global
Note:
AC Input Power Multi-Carrier Cabinet (GMCC). While the cabinet input power is
AC, the power bussed to the carrier power supplies is DC.
Note:
The type of power required is shown on the media gateway's rear door. See
Note:
Table 7: AC power sources and plug type
The connect AC power and ground procedures apply to the AC-powered MCC1 Media
Gateways.
The single-phase, 3-wire, 208 or 240 VAC power source can supply 60 Hz power to the AC
load. This source has 2 hot wires and 1 ground wire (J58890CH).
Either of these power sources can supply 50 Hz power to the AC load:
Non-US 5-wire, Y, 220/380 VAC. This source has 3 hot wires, 1 neutral wire, and 1 ground
wire.
68 Installing the Avaya G650 Media Gateway
on page 69 or
on page 99.
on page 68 shows MCC1 AC power requirements based on AC
Table 6: Power requirements
Maximum UL rating label power capacity
Iac I n
208 24
240 21
120 40
on page 79.
Connecting large battery holdover
on page 98.
Max W I n BTU/Hr.
3245 11071.26
3276 11177.71
3120 10645.44
on page 69.
on