A1 Mid-Span Power Distribution Unit - Avaya G700 Installation And Upgrades

8
Connecting Telephones and Adjunct Systems
Installation and Wiring Telephones and Power Supplies
Local and Phantom Power
An attendant console's maximum distance from the system is limited.
See Table 8, Attendant Console Cabling Distances,
Table 8: Attendant Console Cabling Distances
Enhanced Attendant
Console (302D)
With Selector Console
Phantom powered
Locally powered
Without Selector Console
Phantom powered
Locally powered

1152A1 Mid-Span Power Distribution Unit

The 1152A1 Mid-Span Power Distribution Unit (PDU) is an Ethernet power supply that provides power
to up to 24 46xx-series IP telephones or wireless LAN (WLAN) access points. This unit is used with a
10/100BaseTx standard Ethernet network over a standard TIA/EIA-568 Category 5, 6 or 6e cabling plant.
The 1152A1 meets the current requirements of the IEEE802.3af standard for resistive detection.
The 1152A1 PDU complies with the Underwriters Laboratories Inc. (UL) standard UL 1950, second
edition.
Table 9: 1152A1 PDU UL 1950 Compliance
Complies
Approved
Approved
Approved
Approved
For safety instructions, see
Connect the Cables
Important Safety Instructions
Please read the following helpful tips. Retain these tips for later use.
When using this switch, the following safety precautions should always be followed to reduce the risk of
fire, electric shock, and injury to persons.
320
24 AWG Wire (0.26 mm
Feet
800
5000
1400
5000
UL 1950
CSA C22.2 No.950 Std.
CE Regulatory Compliance
EN 60950
TUV EN 60950
Important Safety Instructions
on page 322.
— Read and understand all instructions.
— Follow all warnings and instructions marked on this switch.
on page 320.
2
) 26 AWG Wire (0.14 mm
Meters Feet
244 500
1524 3400
427 900
1524 3400
on page 320. For installation instructions, see
Installation and Upgrades for G700 and S8300
2
)
Meters
152
1037
274
1037
December 2003