Adding a trunk
Adding a trunk requires you to do the following:
Order the trunk
●
Connect the trunk
●
Configure the trunk on the G250
●
Test the trunk
●
Order the trunk
When you order the trunk:
Make sure to install the trunk near the physical location of the Avaya G250 Media
●
Gateway.
Make sure that the telephone service provider installs the trunk and verifies that the trunk
●
is working properly before you contact the technician that is performing or supervising the
configuration.
Note the telephone number of the trunk.
●
Special considerations when ordering an analog trunk
When you order an analog trunk, there are several recommendations depending on your
system's particular needs:
For optimal functioning of the Emergency Transfer Relay feature, it is recommended to
●
use a loop-start trunk.
Request conditioned lines to ensure satisfactory voice quality and trunking interactions.
●
Connect the trunk
To connect a new trunk, see one of the following sections:
Connecting an analog trunk
●
on page 46
Adding a trunk
Issue 1.1 June 2005
75