Appendix C: Running the Avaya Installation Wizard
This appendix explains how to run Avaya Installation Wizard (Avaya IW). The Avaya IW is a
web-based installation wizard that is used with the Avaya G350 Media Gateway to perform
initial configuration tasks and to upgrade software and firmware. The Avaya IW is designed for
use with systems that contain an S8300 Media Server, operating in either ICC or LSP mode.
You can use Avaya IW to configure the Avaya G350 Media Gateway or to upgrade an installed
S8300 with new Avaya Communication Manager (ACM) software and/or G350 firmware. If you
have an EPW (see
be able to upload configuration parameters from the EPW to AIW as part of your AIW session.
Accessing Avaya IW
To access the Avaya IW:
1. Connect a laptop computer to the Services port of the S8300, using a crossover cable.
2. Make sure the laptop is configured as follows:
IP Address: 192.11.13.5
●
NetMask: 255.255.255.252
●
Disable DNS
●
Clear the primary WINS and secondary WINS IP Addresses
●
Disable the Proxy Server in the Internet Explorer
●
3. Launch Internet Explorer on the laptop and type the following URL to access the S8300
Media Server Home Page: http://192.11.13.6
4. Enter the appropriate login name and password.
(Avaya IW)
Obtain the Electronic Preinstallation Worksheet (EPW)
on page 24), you will
Issue 3.1 June 2006
147