ADTRAN AOS Version R10.1.0 Command Reference Manual page 2457

Command Reference Guide Port Channel Interface Command Set
switchport gvrp
Use the switchport gvrp command to enable GARP VLAN Registration Protocol (GVRP) on an interface.
Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, GVRP is disabled on all ports.
Command History
Release 8.1 Command was introduced.
Functional Notes
Enabling GVRP on any interface enables GVRP globally.
Usage Examples
The following example enables GVRP on port channel 3:
(config)#interface port-channel 3
(config-p-chan3)#switchport gvrp
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2457