Execute - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Example

execute

Syntax
View
Parameter
Description
/all: Displays all files (including those in the recycle bin).
file-url: Name of the file or directory to be displayed. Asterisks (*) are acceptable as
wildcards. For example, to display files with the .txt extension under the current
directory, you may use the dir *.txt command.
Use the command to display information about all visible files and folders in
dir
the current directory.
Use the command to display information about all files and folders on
dir /all
your device, including hidden files, hidden subfiles and those in the recycle bin.
The names of these deleted files are enclosed in pairs of brackets ([ ]).
The dir file-url command displays information about a file or folder.
This command supports the wildcard *.
# Display information about all files and folders.
Directory of cf:/
0 drw-
1 -rw- 16044820
2 -rwh
3 -rw- 2012
4 -rwh 828
5 drw-
6 -rw- 16044820
252344 KB total (220800 KB free)
File system type of cf: FAT16
[ ] indicates this file is in the recycle bin.
execute filename
System view
filename: Name of a batch file with a .bat extension.
Use the command to execute the specified batch file.
execute
Batch files are command line files. Executing a batch file is to execute a set of
command lines in the file.
You should not include invisible characters in a batch file. If an invisible character is
found during the execution, the batch process will abort and the commands that
have been executed cannot be cancelled.
Not every command in a batch file is sure to be executed. For example, if a certain
command is not correctly configured, the system omits this command and goes to
the next one.
- Jul 18 2006 10:32:44
Oct 30 2006 15:46:58
4 Oct 31 2006 14:08:16
Oct 30 2006 16:17:28
Oct 30 2006 16:17:26
- Oct 31 2006 14:28:24
Oct 31 2006 14:34:24
2353
logfile
main.bin
snmpboots
config.cfg
private-data.txt
test
[mytest.bin]