Remark Mpls-Exp - H3C SR6600 Command Reference Manual

Examples
# Create a match criterion for MPLS-based PQ list 10 to assign MPLS packets with the EXP value 5 to the
top queue.
<Sysname> system-view
[Sysname] qos pql 10 protocol mpls exp 5 queue top

remark mpls-exp

Syntax
remark mpls-exp exp-value
undo remark mpls-exp
View
Traffic behavior view
Default level
2: System level
Parameters
exp-value: EXP value, in the range of 0 to 7.
Description
Use the remark mpls-exp command to configure an EXP value marking action in a traffic behavior.
Use the undo remark mpls-exp command to delete the action.
Examples
# Configure traffic behavior database to mark MPLS packets with the EXP value 0.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark mpls-exp 0
135