Restore Startup-Configuration - H3C MSR 20-20 Command Reference Manual

2364 C 156: C
HAPTER ONFIGURATION
Related command:
Example

restore startup-configuration

Syntax
View
Parameter
Description
F M
ILE ANAGEMENT
has both the main and backup attributes, the command erases its backup
attribute.
c
CAUTION: This command will permanently delete the configuration file on the
device. Use it with caution.
save, display saved-configuration.
# Erase the configuration file saved in the storage device. (main/backup attribute
not supported)
<Sysname> reset saved-configuration
The saved configuration will be erased.
Are you sure? [Y/N]:y
Configuration in the device is being cleared.
Please wait .......
Configuration in the device is cleared.
# Erase the configuration file saved in the storage device. (main/backup attribute
supported)
<Sysname> reset saved-configuration backup
The saved configuration will be erased.
Are you sure? [Y/N]:y
Configuration in the device is being cleared.
Please wait .......
Configuration in the device is cleared.
restore startup-configuration from src-addr src-filename
User view
src-addr: IP address or name of a TFTP server. The address cannot be an IPv6
address.
src-filename: Filename of the configuration file to be downloaded from the
specified server.
Use the
restore startup-configuration
configuration file from the specified TFTP server for the next startup of the device.
This command will download the configuration without copying it to the
■
backup board.
If a device supports main/backup configuration file, the file downloaded is the
■
main configuration file.
If a device does not support main/backup configuration file, the command
■
downloads the configuration file for next startup.
If the file to be downloaded has the same filename as an existing file on the main
or backup board, you will be prompted whether you want to overwrite the
C
OMMANDS
command to download the