backup startup-configuration
Syntax
View
Parameter
Description
Example
display saved-configuration
Syntax
View
156
C
ONFIGURATION
C
OMMANDS
backup startup-configuration to dest-addr [dest-filename ]
User view
dest-addr: IP address or name of a TFTP server. The address cannot be an IPv6
address.
dest-filename: Target filename used to save the next startup configuration file on
the server.
Use the
backup startup-configuration
configuration file (for next startup) using a filename you specify. If you do not
specify this filename, the original filename will be used.
With a device that supports main/backup function, this command only backups
■
the main configuration file for next startup.
With a device that does not support main/backup function, this command
■
backups the configuration file for next startup.
Presently, the device uses TFTP to implement backup operation.
# Backup the configuration file for next startup on the TFTP server with IP address
2.2..2.2, using the filename config.cfg.
<Sysname> backup startup-configuration to 2.2.2.2 config.cfg
Backup next startup-configuration file to 2.2.2.2, please wait...
finished!
<Sysname>
display saved-configuration [ by-linenum ]
Any view
F
M
ILE
ANAGEMENT
command to backup the startup
2361