Show Composite-Operation - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - VPN
description (ip
icmp, ip crypto-list,
crypto-list, tcp

show composite-operation

Use the show composite-operation command to display information about a specific
composite-operation. Use the command without a parameter to display information about all
composite-operations.
Syntax
show composite-operation [composite_operation_index]
Parameters
Parameter
composite_operation_
index
User Level
read-write
Context
ip access-control-list, ip access-control-list ip-rule, ip qos-list, ip qos-list ip-rule, ip qos-list
composite-operation
Example
To display information about composite-operation 13:
G450-001(QoS 440)# show composite-operation 13
Index Name
----- -------------------- --------- --------- ------------
13 HSPackets
692 Avaya G450 CLI Reference
rule), destination-ip, dscp (policy-based routing, packet sniffing,
ip-rule (VPN), local-address,
destination-port, tcp source-port,
Description
The composite-operation to display
CoS
cos3
protect crypto map, source-ip,
udp destination-port,
DSCP Trust
1 No
Policy - access control lists
VPN), fragment,
show ip
udp source-port
Possible Default
Values Value
0-19