Special Security Features; Enabling And Disabling Recovery Password - Avaya G350 Administration

Hide thumbs Also See for G350:
Table of Contents

Advertisement

Accessing the Avaya G350 Media Gateway

Special security features

3
Use the
secondary RADIUS Authentication server.
You can use the following commands to change the RADIUS parameters. These commands are optional.
Use the
an access request when there is no response.
Use the
an access request.
Use the
number. Normally, the UDP port number should be set to its default value of 1812. Some early
implementations of the RADIUS server used port number 1645.
To disable RADIUS authentication on the G350, use the
To display the RADIUS parameters, use the
not displayed.
Special security features
This section describes the following special security features:

Enabling and disabling recovery password

recovery password, which provides emergency access to the G350 via a direct connection to the
console port
Enabling and disabling telnet access
and from the G350
Enabling and disabling recovery password
The G350 includes a special recovery password. The purpose of the recovery password is to enable the
system administrator to access the G350 in the event that the regular password is forgotten. You can only
use the recovery password when accessing the G350 via a direct connection to the console port. See
Accessing CLI with a console device
You can use the
You can only use this command when accessing the G350 via a direct connection to the console port.
36
set radius authentication server
set radius authentication retry-number
set radius authentication retry-time
set radius authentication udp-port
on page 27.
set terminal recovery password
command to set the IP address of the primary or
command to set the number of times to resend
command to set the time to wait before resending
command to set the RFC 2138 approved UDP port
set radius authentication disable
show radius authentication
— instructions on how to enable and disable the
— instructions on how to enable and disable telnet access to
command to enable or disable the recovery password.
Administration of the Avaya G350 Media Gateway
command.
command. Shared secrets are
June 2004

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents