Upgrading J-Series Router Software, If Necessary; Verifying The Router Has The Power For The Tims And Pims; Installing Hardware - Avaya IG550 Quick Start Manual

Upgrading J-series router software, if necessary

Note:
The software of the Juniper Services Router must match the
Note:
firmware version of the TGM550. See the Communication
Manager Software/Firmware Compatibility Matrix under
Downloads on support.avaya.com.
1. See the Juniper J2320, J2350, J4350, and J6350 Services Router Getting
Started Guide, Release 8.4.
Verifying the router has the power for the TIMs
and PIMs
Verify that the project manager, sales representative, or sales engineer has
ordered the appropriate quantity and types of TIM and PIM modules for the
router you are installing. If not, see "TIM and PIM limits based on heat and
power used by the IG550" in Overview of the Avaya IG550 Integrated
Gateway, 03-601548.

Installing hardware

1. If the customer has a four-post rack and is using a shelf, install the shelf
according to manufacturer guidelines. If the customer is using the
4 Quick Start for Hardware Installation: IG550 Integrated Gateway