Cli Commands For Upgrading G350 Firmware - Avaya G350 Installing And Upgrading

CLI Commands for upgrading G350 firmware

You can use one of the following commands to upload an upgrade file to the G350. For each of
these commands, include the full path of the file and the IP address of the FTP or TFTP host as
parameters. When you enter the command, the CLI prompts you for a username and password.
Use the copy ftp EW_archive command to upgrade the Java applet for Avaya G350
●
Manager software from an FTP server.
Use the copy ftp module command, followed by the module number of the module you
●
want to upgrade, to upgrade the firmware on a media module from an FTP server.
Use the copy ftp SW_imageA command to upgrade the G350 firmware into Bank A
●
from an FTP server.
Use the copy ftp SW_imageB command to upgrade the G350 firmware into Bank B
●
from an FTP server.
Use the copy tftp EW_archive command to upgrade the Java applet for Avaya G350
●
Manager software from a TFTP server.
Use the copy tftp module command, followed by the module number of the module
●
you want to upgrade, to upgrade the firmware on a media module from a TFTP server.
Use the copy tftp SW_imageA command to upgrade the G350 firmware into Bank A
●
from a TFTP server.
Use the copy tftp SW_imageB command to upgrade the G350 firmware into Bank B
●
from a TFTP server.
Use the copy ftp EW_archive command to upgrade the Java applet for Avaya G350
●
Manager software from an FTP server.
Use the copy ftp module command, followed by the module number of the module you
●
want to upgrade, to upgrade the firmware on a media module from an FTP server.
Use the copy ftp SW_imageA command to upgrade the G350 firmware into Bank A
●
from an FTP server.
Use the copy ftp SW_imageB command to upgrade the G350 firmware into Bank B
●
from an FTP server.
Use the copy tftp EW_archive command to upgrade the Java applet for Avaya G350
●
Manager software from a TFTP server.
Use the copy tftp module command, followed by the module number of the module
●
you want to upgrade, to upgrade the firmware on a media module from a TFTP server.
Use the copy tftp SW_imageA command to upgrade the G350 firmware into Bank A
●
from a TFTP server.
Use the copy tftp SW_imageB command to upgrade the G350 firmware into Bank B
●
from a TFTP server.
Upgrading G350 firmware using the CLI
Issue 3.1 June 2006 99