Configure Module E1 Linemode; Configure Module E1 Name; Configure Module E1 Yellow_Alarm - Avaya 2330 Reference Manual

T1/E1 module configuration commands

configure module e1 linemode

Use this command to configure the line mode for the E1 interface.
Syntax
linemode {long_haul | short_haul}
Table 40: Variable definitions
Variable
long_haul
short_haul
Example
AG/configure/module/e1 (3/1)# linemode short_haul

configure module e1 name

Use this command to assign a name to the E1 link.
Syntax
name <name>
Table 41: Variable definitions
Variable
<name>
Example
AG/configure/module/e1 (3/1)# name test1

configure module e1 yellow_alarm

Use this command to configure the yellow alarm operation on the E1 link.
68 Command Line Reference
Value
Long haul type for linemode configuration.
Operations up to 6 dB. (default).
Short haul type for linemode configuration.
Operations up to 43 dB.
Value
Assigns a name to the E1 link (max 16
bytes).
Comments? infodev@avaya.com
August 2013