Map-Class Frame-Relay - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - Frame relay encapsulation
clear frame-relay
interface-dlci,
frame-relay lmi-type,
frame-relay, bc
brief, show interfaces,
Related Commands - IP interface configuration
description (interface),
serial, interface
broadcast-address, load-interval,

map-class frame-relay

Use the map-class frame-relay command to create a QoS template named
map_class_name, which can later be assigned to DLCIs.
Use the no form of this command to delete a map class.
Note:
This command fails if the map class is currently associated with a DLCI.
Note:
Syntax
[no] map-class frame-relay map_class_name
Parameters
Parameter
map_class_name
User Level
read-write
Context
general
Example
To create a map class named mySVoip1:
G450-001(super)# map-class frame-relay mySVoip1
426 Avaya G450 CLI Reference
counters, interface
frame-relay lmi-n391dte,
frame-relay priority-dlci-group,
out, be out, cir out, fragment,
show traffic-shape,
interface console,
tunnel, interface USB-modem,
show ip interface brief
Description
The name of a map class configured by the user
serial, encapsulation,
frame-relay lmi-n392dte,
frame-relay
show frame-relay
GRE tunneling, show traffic-shape-statistics
interface fastethernet,
interface vlan,
Frame relay encapsulation
frame-relay class-dlci,
frame-relay lmi-n393dte,
traffic-shaping, map-class
map, show frame-relay pvc
interface loopback,
ip admin-state, ip
Possible
Values
frame-relay
interface
Default
Value