Chapter 11: WAN interfaces
WAN interfaces
You can use a Fast Ethernet port on the Branch Gateway chassis as the endpoint for a WAN
line by configuring the FastEthernet interface for PPP over Ethernet (PPPoE). The Branch
Gateway serves as a router, as well as the endpoint, for the WAN line. For more information
about routing, see
Related topics:
Configuring the initial WAN
Configuring the initial WAN
Procedure
1. Use the Fast Ethernet port on the G430 chassis as the endpoint for a WAN line by
2. Test the WAN configuration.
3. Enter copy running-config startup-config to save the configuration.
Related topics:
PPPoE overview
PPPoE overview
You can configure ETH WAN Fast Ethernet ports as a WAN port using PPPoE (PPP over
Ethernet). PPPoE offers dialup style authentication and accounting and allows subscribers to
dynamically select their ISP.
PPPoE is a client-server protocol used for carrying PPP-encapsulated data over Ethernet
frames. A PPPoE client can establish a tunnel that carries PPP frames between a dialing host
(the Branch Gateway) and an access concentrator. This enables the use of PPP authentication
Administering Avaya G430 Branch Gateway
The router
on page 479.
on page 251
configuring this interface for PPPoE.
See
Configuring PPPoE
See WAN configuration and testing connectivity.
on page 251
on page 252.
October 2013
251