Renault Laguna III Manual page 2051

Front right-hand driveshaft gaiter, gearbox side: Removal - Refitting
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Cut the large tightening clip (1) and the small tight-
ening clip (2) using cutting pliers or a hacksaw, tak-
ing care not to damage the yoke sleeve and the
propeller shaft.
a Push back the gaiter to release the driveshaft yoke
sleeve.
DRIVESHAFTS
128487
128486
29A-22
a Remove the yoke sleeve (3) .
Note:
- since the driveshaft yoke sleeve does not have
a stop tab, it can be removed without being
forced.
- Do not remove the rollers from their respective
bushings as the rollers and needles are
matched and should never be interchanged.
a Remove as much grease as possible from the yoke
sleeve.
29A
128793