Renault Laguna III Manual page 2040

Front right-hand driveshaft: Removal - Refitting
TL4
Special tooling required
Rou. 604-01 Hub locking tool.
Tav. 476 Ball joint extractor.
Tightening torquesm
relay bearing bolt
shock absorber base
nuts
track rod end nut
hub nut
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the engine undertray bolts,
- the engine undertray.
a Drain the manual gearbox (see 21A, Manual gear-
box, Manual gearbox oils: Draining - Filling, page
21A-2) .
DRIVESHAFTS
21 N.m
180 Nm
37 Nm
280 N.m
29A-11
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Unclip from the base of the shock absorber:
- the wiring (1) from the wheel speed sensor.
- the brake hose (2) .
29A
122721
122720