Renault Laguna III Manual page 2057

Front left-hand driveshaft gaiter, gearbox side: Removal - Refitting
a Remove the lock ring (4) .
Note:
Mark the position of the spider before extracting
it.
a Remove:
- the spider (5) ,
- the gaiter from the driveshaft,
- the cup equipped with the cup spring.
DRIVESHAFTS
109409
127992
29A-28
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace:
- the cup,
- the cup spring,
- the driveshaft gaiter,
- the locking ring,
- the big securing clip,
- the small securing clip.
a Using a parts washer, clean the driveshaft, the spi-
der and the yoke sleeve.
II - REFITTING OPERATION FOR PART
CONCERNED
a Fit the small securing clip (6) onto the driveshaft.
a Lightly lubricate the driveshaft using the grease sup-
plied with the gaiter to facilitate its fitting.
29A
128412