Renault Laguna III Manual page 2034

Front left-hand driveshaft: Removal - Refitting
TL4
Special tooling required
Rou. 604-01 Hub locking tool.
Tav. 476 Ball joint extractor.
Emb. 880 Pin extractor tool.
Tav. 1813 Extraction
secured type driveshafts
Tightening torquesm
shock absorber base
bolts
track rod end nut
hub nut
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Remove:
- the front left-hand wheel (see Wheel: Removal -
Refitting) (MR 415, 35A, Wheels and tyres),
- the engine undertray bolts,
- the engine undertray.
a Drain the manual gearbox (see 21A, Manual gear-
box, Manual gearbox oils: Draining - Filling, page
21A-2) .
DRIVESHAFTS
claw for clip
180 Nm
37 Nm
280 Nm
29A-5
II - REMOVAL OPERATION FOR PART
CONCERNED
a Unclip, from the base of the shock absorber:
- the wheel speed sensor wiring (1) ,
- the brake hose (2) .
29A
122721
122720