Isis Retransmit-Throttle-Interval - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
isis retransmit-throttle-interval
Syntax
Release Information
Description
Options
Mode
1130
isis retransmit-throttle-interval milliseconds
no isis retransmit-throttle-interval
Command introduced before JunosE Release 7.1.0.
Configures the amount of time between retransmissions of any IS-IS LSPs on a
point-to-point interface. The no version restores the default value, 33 milliseconds.
milliseconds—Number of milliseconds in the range 0–65535; the minimum delay
between LSP retransmissions on the interface
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
