Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide A to M
isis retransmit-throttle-interval
Syntax
Release Information
Description
Options
Mode
1132
isis retransmit-throttle-interval milliseconds
no isis retransmit-throttle-interval
Command introduced before JunosE Release 7.1.0.
Configures the amount of time between retransmissions of any IS-IS LSPs on a
point-to-point interface. The no version restores the default value, 33 milliseconds.
milliseconds—Number of milliseconds in the range 0–65535; the minimum delay
between LSP retransmissions on the interface
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
