Isis Network Point-To-Point - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

isis network point-to-point

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] isis network point-to-point
Command introduced before JunosE Release 7.1.0.
Specifies the IS-IS circuit type as point-to-point. Issuing this command tears down existing
adjacencies, originates or flushes LSPs, and establishes new adjacencies. The no version
restores the default, treating the circuit as a broadcast circuit.
Interface Configuration
Chapter 10: I Commands
1129