Network Security Specifications
Network Security Specifications
RFCs supported
IEEE Standards supported
Platforms Supported
Maximum number of monitor-
ing-groups
Time duration to observe traffic
pattern
Minimum traffic to activate
anomaly detection
Anomaly sensitivity to deviation 1 to 100
Network Security Defaults
Parameter Description
Status of anomaly detection
Log status
Trap status
Quarantine status
Time duration to observe traffic
pattern
Anomaly sensitivity to deviation
page 47-2
Not applicable at this time.
Not applicable at this time.
OmniSwitch 6850, 6855, and 9000
32
5 to 3600 in seconds
1 to 100000
Command
netsec group anomaly
netsec group anomaly
netsec group anomaly
netsec group anomaly
netsec group anomaly
netsec group anomaly
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring Network Security
Default Value/Comments
Disabled
Disabled
Disabled
Disabled
30 seconds
50
September 2009