Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3455

Network Time Protocol Commands
server qualification
Stratum
Max-Association
Authentication
Source IP Configuration
Source IP
Release History
Release 6.4.2; command was introduced.
Related Command
ntp client
ntp server
ntp server synchronized
ntp max-associations
ntp master
ntp broadcast-client
show ntp client
show ntp client server-list
show ntp server client-list
MIB Objects
alaNtpPeerListTable
alaNtpPeerShowOriginateTime
alaNtpPeerShowTransmitTime
alaNtpEnable
alaNtpBroadcastEnable
alaNtpBroadcastDelay
alaNtpPeerTests
alaNtpPeerStratum
alaNtpPeerTests
alaNtpAuthenticate
alaNtpSrcIpConfig
alaNtpSrcTp
OmniSwitch CLI Reference Guide
Server qualification status.
The stratum of the server. The stratum number is the number of hops
from a UTC time source.
Maximum association on the switch that restricts the number of client/
server and peer association
Whether Authentication is enabled or disabled
Source IP Configuration type which is configured.
Source IP address for NTP that send updates to clients.
Enables or disables NTP operation on the switch.
Specifies an NTP server from which the switch will receive updates
Enables an NTP client to invoke tests for NTP server synchronization
as specified by the NTP protocol.
Configures the maximum number of associations on the switch.
Specifies the stratum value for unsynchronized switch
Enables or disables the client's broadcast mode.
Displays information about the current client NTP configuration.
Displays a list of the servers with which the NTP client synchronizes
Displays the basic server information for a specific NTP server or a list
of NTP servers
June 2012 page 56-23