Voip-Queue-Delay - Avaya G450 Cli Reference Manual

CLI Commands

voip-queue-delay

Use the voip-queue-delay command to set the maximum queue delay for which to
estimate the high priority queue size necessary to meet the queueing delay for specific VoIP
codec parameters. Use the no form of this command to return the maximum queue delay
introduced for VoIP traffic by egress queueing to the default value of 20ms.
Note:
The command voip-queue-delay is not applicable for an interface on which
Note:
Frame-Relay Traffic-Shaping is enabled. Instead, this command is now
applicable under map-class frame-relay context, to control the specific DLCI
queueing parameters.
Syntax
[no] voip-queue-delay queue_delay_ms [codec [frames-per-packet]]
Parameters
Parameter
queue_delay_ms
codec
frames-per-packet
User Level
admin
836 Avaya G450 CLI Reference
Description
The maximum queue delay, in
milliseconds, for which to estimate the
high priority queue size. The queue
delay is the amount of time that voice
traffic is allowed to wait in the queue.
The codec for which to estimate the
high priority queue size
The number of codec frames per IP
packet for which to estimate the high
priority queue size
Priority queueing
Possible Default
Values Value
1-1000 20
g711mu g729
g711a
g729
g729a
g729b
g729ab
g723-5.3
g723-6.3
1-6 2