Chapter 4: Connecting and enabling a USB
Connecting and enabling a USB modem for remote access
About this task
You can connect a USB modem to the Branch Gateway to enable configuration from a remote
location.
If an S8300 is installed in the Branch Gateway, leave a modem connected permanently to enable
reporting of alarms to remote locations.
Related links
Gateways without S8300 modem connections
Gateways without S8300 modem connections
You can connect a USB modem to the USB port on the Gateway front panel.
Related links
Connecting and enabling a USB modem for remote access
Branch Gateways with S8300 USB modems
You can connect a USB modem to a USB port on the S8300 front panel. See
supported by the S8300
Related links
Maintenance web pages
Branch Gateways with S8300 modem connections
Testing the modem connection (Branch Gateway with S8300)
Connecting the USB CD-ROM drive
February 2017
modem for remote access
on page 130 for a list of the USB modems supported by the S8300.
on page 57
on page 59
Installation and Upgrades for the Avaya Branch Gateway G430
Comments on this document? infodev@avaya.com
on page 56
on page 56
on page 58
on page 58
USB modems
56