Operational Mode - Avaya W310 User Manual

The following are the channel selection CLI commands for the radio card context mode:
In order to...
Enable or disable automatic channel
selection for the wireless interface
Specify the allowed frequency bands to
use for automatic channel selection for
the wireless interface

Operational Mode

The operational mode lets you specify the mode at which the wireless client cards can
operate within the network. You can specify one or more modes, including:
• 802.11b
• 802.11bg
• 802.11g
• 802.11a
The following is the operational mode CLI command for the radio card context mode:
In order to...
Sets the operational mode for the
wireless interface
Avaya W310 User's Guide
If you disable Automatic
Channel Selection
through the W310
Device Manager or the
CLI (channel-
selection
selective), then you
must set the Channel
Frequency for the W110.
Chapter 12 W310 WLAN Gateway Wireless Features
Use the following command...
automatic-channel-selection
automatic-channel-selection-allowed-
band
Use the following command...
operational-mode
209