Capture Stop - Avaya G450 Cli Reference Manual

Note:
In order to upload a capture file, you must first stop the packet sniffing service.
Note:
Syntax
capture start
User Level
read-write
Context
general
Examples
If the packet sniffing service has been enabled by the administrator:
G450-001(super)# capture start
Starting the packet sniffing process
If the packet sniffing service has not been enabled by the administrator:
G450-001(super)# capture start
The sniffing service is not available.
To re-enable, use the 'capture-service' command in supervisor mode.
Related Commands
capture buffer-mode,
capture max-frame-size,
name, show capture,

capture stop

Use the capture stop command to stop the packet sniffing service.
Note:
This command is not saved in the startup configuration file.
Note:
Note:
In order to upload a capture file, you must first stop the packet sniffing service.
Note:
Syntax
capture stop
capture buffer-size, capture
capture stop, capture-service,
show capture-buffer hex
filter-group, capture interface,
clear capture-buffer,
Issue 1 January 2008
Packet sniffing
capture ipsec,
ip capture-list,
641