ip dhcp-server
By default, DHCP server is inactive. Use the dhcp-server command to activate the DHCP
server on the G450. Use the no form of this command to deactivate the DHCP server.
Syntax
[no] ip dhcp-server
User Level
read-write
Context
general
Example
To enable DHCP server:
G450-001(super)# ip dhcp-server
Related Commands
clear ip dhcp-server
packets,
ip dhcp ping
show ip dhcp-server statistics
show ip dhcp-server bindings
A binding is an assignment of an IP address to a client. Use the show ip dhcp-server
bindings command to display bindings.
Syntax
show ip dhcp-server bindings
Parameters
User Level
read-only
Context
general
binding,
clear ip dhcp server
timeout,
ip dhcp
pool,
statistics,
ip dhcp activate
show ip
dhcp-pool,
show ip dhcp-server
DHCP server
pool,
ip dhcp ping
bindings,
Issue 1 January 2008
321