Summary Of Access Control List Commands - Avaya G430 Manual

Composite action for simulated packet is CoS6
New priority value is fwd6
Dscp value is not changed
Simulated packet properties
• CoS priority is 1
• DSCP is 46
• source IP address is 10.1.1.1
• destination IP address is 10.2.2.2
• IP protocol is TCP
• source TCP port is 1182
• destination TCP port is 20

Summary of access control list commands

For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root level
command
interface {dialer|
loopback|
fastethernet|
tunnel|vlan}
ip access-
control-
list
Administering Avaya G430 Branch Gateway
Command
ip access-
group
ip simulate
show ip
access-
control-list
Command
Enter the Dialer, Loopback,
FastEthernet, Tunnel or
VLAN interface configuration
context
Activate a specific Access
Control list, for a specific
direction, on the current
interface
Test the action of a policy on
a simulated packet
Display the attributes of a
specific access control list or
of all access control lists on
the current interface
Enter configuration mode for
the specified policy access
control list, and create the list
if it does not exist
Policy lists
Description
October 2013 581