Chapter 2: Ap Group Commands; Add-Ports - Avaya W310 Command Reference Manual

Chapter 2
AP Group Commands
This chapter describes the commands that you use to configure access point (AP) groups:
•

add-ports

• delete-ports
• interface AP-Group
• show AP-Group
add-ports
User level: supervisor
Command Mode: AP Group Interface
Use the add-ports command to add a port or ports to an Access Point (AP) Group. The
ports cannot be associated with any other AP Group.
Syntax:
The syntax for this command is:
add-ports <ports>
Syntax
<ports>
Example:
To add a port to an AP Group:
W310-1(super/AP-Group flr3)# add-ports 2,4,5-8
W310-1(super/AP-Group flr3)#
Avaya W310 Command Reference Guide
Description
Port number. The port cannot be attached to any other AP Group.
To specify a port or range of ports, for example, 8-12.
9