Rtp-Test-Port - Avaya G450 Cli Reference Manual

Parameters
Parameter
port
User Level
read-write
Context
cna-testplug
Example
To set the RTP echo port to port 45230:
G450-001(cna-testplug 1)# rtp-echo-port 45230
Related Commands
clear counters (CNA test
scheduler, show cna

rtp-test-port

Use the rtp-test-port command to set the UDP port used by the CNA test plug to send an
RTP stream to another test plug in an RTP test. Use the no form of the command to return to
the default UDP port for RTP tests.
Syntax
rtp-test-port port
no rtp-test-port
Parameters
Parameter
port
Description
The UDP port number to be used as the RTP echo
port number
plugs), cna testplug, cna-testplug-service, control-port, rtp-test-port,
testplug, shutdown (CNA test
Description
The UDP port number to be used as the RTP test
port
Possible
Values
1-65535
plugs), test-rate-limit
Possible
Values
1-65535
Issue 1 January 2008
CNA test plugs
Default
Value
8888
Default
Value
8887
217