Chapter 3: New in this release
This chapter provides an overview of the new and enhanced features in Branch Gateway Release
8.1.x.
For more information about administering these features, see Administering Avaya G450 Branch
Gateway and Avaya Branch Gateway G450 CLI Reference.
New in Branch Gateway Release 8.1.2
The following section describes new features and enhancements that are available in Branch
Gateway 8.1.2.
Log retention
The following commands are added for log retention:
set logging file retention {retention_days}
show logging file retention
G450 v4 support
In Release 8.1.2, G450 v4 is available with the firmware versions 7.1.3.5, 8.1.1, or later.
G450 v4 supports only the MP 160 DSP module. You can have a maximum of two MP 160 DSP
modules. Each MP 160 DSP module supports 160 channels.
New in Branch Gateway Release 8.1
The following sections describes new features and enhancements that are available in Branch
Gateway in Release 8.1 and later:
Syslog over TLS
Branch Gateway supports the syslog application directory for the TLS certificates.
The following commands are updated to add TLS for syslog:
• set link-encryption syslog <all | tls | tls1.2 | tls1.1 | tls1.0>
<yes | no>
April 2020
Avaya G450 Branch Gateway Overview and Specification
Comments on this document? infodev@avaya.com
19