Frame Relay Encapsulation Features - Avaya G250 Administration

Note:
If several default routers are learned from a specific interface, the object tracker
Note:
tracks only the first one.
! Apply DHCP client on the WAN Fast Ethernet
!
interface FastEthernet 10/2
ip address dhcp
exit
!
! Configure the RTRs and object trackers.
! Use the next-hop command to ensure that the RTR is sent over the
! next hop it is monitoring, which is the WAN Fast Ethernet running
! DHCP client.
!
! 192.30.3.1 is the remote HQ peer IP address.
!
rtr 2
type echo protocol ipIcmpEcho 192.30.3.1
next-hop interface FastEthernet 10/2
exit
track 2 rtr 2
exit
!
! Apply object tracking on the DHCP client.
!
interface FastEthernet 10/2
ip dhcp client route track 2
exit

Frame relay encapsulation features

The Avaya G250/G350 Media Gateway supports the following frame relay encapsulation
features:
Frame Relay Traffic Shaping and FRF.12 Fragmentation
●
Priority DLCI
●
Note:
The terms PVC (Permanent Virtual Circuit) and DLCI (Data Link Connection
Note:
Identifier) describe the same entity and are interchangeable.
To improve voice quality using RTP, see
Frame relay encapsulation features
Configuring header compression on page 201.
Issue 3 February 2007 271