ADTRAN AOS Version R10.1.0 Command Reference Manual page 2317

Command Reference Guide
dial-backup auto-restore
Use the dial-backup auto-restore command to configure the interface to automatically discontinue dial
backup when all network conditions are operational. Use the no form of this command to disable the
auto-restore feature. For more detailed information on dial-backup functionality, refer to the Functional
Notes and Technology Review sections of
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically restore the primary connection when the failure
condition clears.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example configures AOS to automatically restore the primary connection when the failure
condition clears:
(config)#interface hdlc 1
(config-hdlc 1)#dial-backup auto-restore
60000CRG0-35E
dial-backup call-mode on page
Command was introduced.
Command was expanded to include the Point-to-Point Protocol (PPP)
interface.
Copyright © 2012 ADTRAN, Inc.
HDLC Interface Command Set
2319.
2317