ADTRAN AOS Version R10.1.0 Command Reference Manual page 2313

Command Reference Guide
bridge-group <number> vlan-transparent
Use the bridge-group vlan-transparent command to prevent an interface from removing the virtual local
area network (VLAN) tag. Use the no form of this command to allow the interface to remove the VLAN
tag from the packet.
The bridge-group vlan-transparent command is not a global command. The command
must be applied on all interfaces of the bridge group.
Syntax Description
<number>
Default Values
By default, VLAN tags are removed from the data.
Command History
Release 12.1
Release 14.1
Usage Examples
The following example removes the VLAN tags from the packets on the HDLC 1 interface:
(config)#interface hdlc 1
(config-hdlc 1)#bridge-group 1 vlan-transparent
60000CRG0-35E
Specifies the bridge group number. Valid range is 1 to 255.
Command was introduced.
Command was expanded to include the high level data link control (HDLC)
interface and Frame Relay subinterface.
Copyright © 2012 ADTRAN, Inc.
HDLC Interface Command Set
2313