Distribute-Domain-Wide - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

distribute-domain-wide

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] distribute-domain-wide
Command introduced before JunosE Release 7.1.0.
Increases the granularity of routing information within an IS-IS domain by allowing routes
to be distributed from level 2 to level 1. This results in more accurate routing between
level 1 areas. The no version disables the command.
Router Configuration
Chapter 5: D Commands
527