mkdir
Creates a new directory.
mkdir [path/]dir
Syntax Definitions
path
dir
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Be sure to separate path directories with a slash (/). Refer to the examples below.
•
Up to 255 characters may be used for a fully qualified path.
•
A path can contain up to a maximum of seven (7) directories including /flash.
•
As with files names, up to thirty-two (32) characters may be used for a directory name.
•
File and directory names can include only the following character types: a-z, A-Z, 0-9, dashes (-),
dots (.), and underscores (_).
•
This command can also be used on the secondary CMM.
Examples
-> mkdir test_directory
-> mkdir flash/test_directory
Release History
Release 6.1; command was introduced.
page 58-6
The path in which the new directory is being created. If no path is speci-
fied, the new directory is created in the current path.
A user-defined name for the new directory. Up to thirty-two (32) char-
acters may be used (e.g., test_directory).
File Management Commands
OmniSwitch CLI Reference Guide
June 2012