Alias - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

alias

Defines substitute command text for the switch's CLI command keywords.
alias alias command_name
Syntax Definitions
alias
command_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Alias commands are stored until the user session ends. To save alias settings, you must execute the
user profile save
with the alias command are destroyed.
•
You can eliminate excess typing by reducing the number of characters required for a command. For
instance, the group syntax can be defined as gp.
•
You can change unfamiliar command words into familiar words or patterns. For instance, if you prefer
the term "privilege" to the term "attribute" with reference to a login account's read/write capabilities,
you can change the CLI command from attrib to privileges.
•
To reset commands set with alias back to their factory default, use the
Examples
-> alias gp group
-> alias privilege attrib
Release History
Release 6.1; command was introduced.
page 57-14
Text string that defines the new CLI command name (alias) that you
will use to replace an old CLI command name.
The old CLI command name being replaced by your alias.
command. Otherwise, once you log off the switch, substitute commands configured
Session Management Commands
user profile reset
OmniSwitch CLI Reference Guide
command.
June 2012